No results were found for the filter!
NTC Thermistor with wire, 100k, Beta = 3950, 1... NTC Thermistor with wiring, 100k, Beta = 3950, 1 piece The thermistor is preconfigured with a wire of around 1m length. Therefore the thermistor is already soldered to the cable and isolated. A connector has to be soldered only at the...
€2.80 *
Hexagon Nozzle 0.4mm, 1.75mm Filament Hexagon Hotend Nozzle 0.4mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.4mm for the Hexagon Hotend for 1.75mm filament.
€7.50 *
Hexagon Nozzle 0.5mm, 1.75mm Filament Hexagon Hotend Nozzle 0.5mm diameter, 1.75mm Filament Hotend Nozzle with a diameter of 0.5mm for the Hexagon Hotend for 1.75mm filament.
€7.50 *
RRD Hall-Endstop RRD Hall-Endstop with 2 magnets The Hall Endstop enables an easy inductive detection of the endstop position of your 3D printer. When assembling the magnet at your printer you must take care of the magnet polarity! The hall sensor only...
€8.50 *
PCB MK2B R1 Dual Power Heatbed PCB MK2b R1 Dual Power Heat Bed PCB Heat Bed MK2b usable with 12V and 24V Dimensions: 214mm x 214mm SMD Leds presoldered for control recommended permanent heating 120°C Powersupply 12V and 24V selectable by connectors based on the MK2A...
€17.90 *
Silicon rubber heat bed 180W - 12V - 200x200mm Silicon rubber heat bed 180W - 12V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 12V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
Silicon rubber heat bed 180W - 24V - 200x200mm Silicon rubber heat bed 180W - 24V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 24V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
Bulldog Lite Extruder for 1.75mm Filament Bulldog Lite Extruder for 1.75mm Filament symetric design (you can mount motor motor left or right side) additional 6mm inner screw thread fully assembled and tested full metal extruder grove mount compatible hotend holder stable and...
€89.50 *
Hexagon Thermoblock Hexagon Thermoblock The thermal block fits for the 1.75mm and 3mm Hexagon Hotend from Reprapdiscount.
€9.10 *
Hexagon silicone jacket Hexagon silicone jacket The silicone jacket stabilizes the temperature within the thermal block by isolating the block. Thurthermore it avoids messing the block with remains of filament.
€8.50 *
Set 4x NEMA 17 stepper motor - 4000g*cm Set of 4x NEMA 17 stepper motor, model 17HS4417 The set contains 4x NEMA 17 stepper motor with a phase angle of 1.8°. The set is ideal for users which want to build a 3d printer like Protos, Ordbot Hadron or similars. Most of the 3d...
€43.90 *
Set 5x NEMA 17 stepper motors - 4000g*cm Set of 5x NEMA 17 stepper motor, model 17HS4417 The set contains 5x NEMA 17 stepper motor with a phase angle of 1.8°. The set is ideal for users which want to build a 3d printer like Protos, Ordbot Hadron or similars. Most of the 3d...
€52.90 *
Viewed