RepRap 3d Hardware

  Here you find mechanical and electronic devices you need to build your own 3D printer like:

  • Printercontrols: Arduino 2560 + RAMSP 1.4, RUMBA
  • LCD displays
  • Stepper motor drivers
  • Stepper motors
  Here you find mechanical and electronic devices you need to build your own 3D printer like: Printercontrols: Arduino 2560 + RAMSP 1.4, RUMBA LCD displays Stepper motor drivers... read more »
Close window
RepRap 3d Hardware

  Here you find mechanical and electronic devices you need to build your own 3D printer like:

  • Printercontrols: Arduino 2560 + RAMSP 1.4, RUMBA
  • LCD displays
  • Stepper motor drivers
  • Stepper motors
Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
5 From 5
No results were found for the filter!
Bulldog Lite Extruder for 1.75mm Filament
Bulldog Lite Extruder for 1.75mm Filament
Bulldog Lite Extruder for 1.75mm Filament symetric design (you can mount motor motor left or right side) additional 6mm inner screw thread fully assembled and tested full metal extruder grove mount compatible hotend holder stable and...
€89.50 *
In stock
RepRap Ramps 1.4 Fan Extender
RepRap Ramps 1.4 Fan Extender
RRD Fan Extender for RAMPS 1.4 The RRD Fan Extender for RAMPS 1.4 will be needed if you use your RAMPS 1.4 with Dual-Extruder and all standard outputs D8/D9/D10 are already occupied. Package content: 1x RRD fan extender (assembled and...
€16.90 *
In stock
LCD Smart Controller (with wiring)
LCD Smart Controller (with wiring)
RepRap LCD Smart Controller 20x4 characters display The LCD Smart Controller is a cost efficient way to use your RepRap 3d printer autonomous. With the encoder you can step through the menue items of the printer firmware and control the...
€19.50 *
Hotend Heater Cartridge 24V 40W
Hotend Heater Cartridge 24V 40W
RepRap hotend heater cartrigde 24V ~40W Heater cartridge for RepRap hotends, 24V, around 40W power Dimensions 6mm diameter 20mm length around 1m wires
€3.90 *
In stock
J-Head Hotend, 3mm Filament, 0.3mm Nozzle
J-Head Hotend, 3mm Filament, 0.3mm Nozzle
J-Head Hotend for 3mm filament with 0.3mm nozzle J-Head Hotend for 3mm filament and 0.3mm nozzle Heat cartrigde 12V ~40W, 6mm diameter, 20mm length Thermistor NTC 100K B=3950 preassembled with around 1m wires
€39.90 *
J-Head Hotend, 3mm Filament, 0,5mm Nozzle
J-Head Hotend, 3mm Filament, 0,5mm Nozzle
J-Head Hotend for 3mm filament with 0.5mm nozzle J-Head Hotend for 3mm filament and 0.5mm nozzle Heat cartrigde 12V ~40W, 6mm diameter, 20mm length Thermistor NTC 100K B=3950 preassembled with around 1m wires
€39.90 *
5 From 5
Viewed