Products from Lankeda Technology Ltd.
No results were found for the filter!
J-Head Hotend for 1.75mm filament with 0.5mm nozzle J-Head Hotend for 1.75mm filament and 0.5mm nozzle Heat cartrigde 12V ~40W, 6mm diameter, 20mm length Thermistor NTC 100K B=3950 preassembled with around 1m wires
€39.90 *
Mechanical Endstop with cabling Mechanical endstop and wirings. The cable has a length of approx. 70cm.
€3.50 *
Opto Endstop with wiring At least 3 endstops are needed for a 3d printer. The endstop is needed for calibrating the printer when a printjob starts. The set contains the optical sensor and a cable with around 70cm length for connecting...
€3.95 *
14pcs cables complete wiring set The wiring set is ideal for RepRap 3d printers like Mendel, Prusa, OrdBot Hadron or similar models. Each cable has a length of around 70cm and is finished with pin headers. Product contents: 5x 4pin for...
€9.90 *
Linear bearing SC10UU Linear bearings SC10UU are perfect for use in a machine with 10mm rods. The linear breaings provide optimal sliding properties along the axes and thus enhance the lifetime and the precision of the printer.
€3.45 *
NTC Thermistor with wiring, 100k, Beta = 3950, 1 piece The thermistor is preconfigured with a wire of around 1m length. Therefore the thermistor is already soldered to the cable and isolated. A connector has to be soldered only at the...
€2.80 *
Silicon rubber heat bed 180W - 12V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 12V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
Silicon rubber heat bed 180W - 24V - 200x200mm The self taping silicon rubber heat pad with a power dissipation of 180W at 24V. Compared to the commonly used PCB heat beds, this silicon rubber heat pad will reach the desired temperature...
€42.90 *
J-Head Hotend for 1.75mm filament with 0.3mm nozzle J-Head Hotend for 1.75mm filament and 0.3mm nozzle Heat cartrigde 12V ~40W, 6mm diameter, 20mm length Thermistor NTC 100K B=3950 preassembled with around 1m wires
€39.90 *
Mounting bracket for hotends like J-Head Mounting bracket to assemble hotends at the X-axis carriage Note: This mounting bracket is needed to assemble hotends togehter with an extruder like Wades, if it's not already part of the Extruder...
€9.90 *
Ball bearing 625 2RS The ball bearing of type 625 is needed for 3d printers or CNC maschines, which use MakerSlide or V-Slot construction profiles for lienar motion. inner diameter: 5mm outer diameter: 16m height: 5mm Delivery contents:...
€0.99 *

Flanged ball bearing F605 ZZ 5x14x5mm The flanged ball bearing F605 is ideal for assembling a pulley for the 3d printer timing belt. Therefore you assemble two bearings with the flange to the outer side. inner diameter: 5 mm outer...
€1.90 *
Viewed